Magnetic Saturn platform for jumping spiders as a two-part planet

A small planet as a landing pad in your terrarium galaxy.

The magnetic SpoodScapes Saturn platform combines a pastel green planet with a lavender ring. Its special design consists of two halves: one sits inside the terrarium, the other outside on the transparent wall. Together, they create the impression that Saturn is floating through the terrarium wall.

The inner part of the planetary ring offers your jumping spider an additional surface for climbing, resting, and jumping. The outer half serves as a magnetic counterpart and completes the planet shape.

At a glance

• Magnetic platform in a Saturn design for jumping spiders
• Two-part planet with an inner and an outer half
• Floating planet effect on transparent terrarium walls
• Inner planetary ring as a resting and jumping area
• Integrated neodymium magnets in both halves
• For suitable glass and acrylic glass walls
• Pastel green planet with lavender ring
• 3D-printed from PLA

Scope of delivery

• 1 Saturn platform, consisting of an inner planet half and a matching outer counterpart
• Integrated neodymium magnets in both halves

The two halves together form one planet. The outer half serves as a counterpart for attachment and is not an independently usable platform.

Terrarium, back wall, hides, water stations, bridges, animals, and other pictured decorations are not included in the scope of delivery.

The Saturn platform in detail

A planet on both sides of the wall

The two planet halves are attached opposite each other on the inside and outside of a transparent terrarium wall. The coordinated shape makes the planet appear to pass through the pane.

For this effect and for attachment, the chosen spot must be accessible from both sides.

Elevated resting and jumping spot

The wide ring section inside the terrarium creates an additional area for hanging out and exploring. You can place it next to a hide, a bridge, or other platforms.

The ring section located outside the terrarium belongs to the decorative counterpart and is not accessible to your animal in the closed terrarium.

Magnetic attachment

Rectangular neodymium magnets are integrated into both halves. They hold the parts together through a suitable glass or acrylic glass wall. Glue, tape, or suction cups are not required.

The hold depends on the wall thickness and the nature of the terrarium wall. Check that both halves are securely seated before use.

Pastel colors for your space-themed world

The combination of pastel green and lavender matches the SpoodScapes Luna theme world. Together with moon hides, rockets, and other space motifs, it creates a small galaxy for your terrarium.

Materials and structure

• Planet halves and ring: 3D-printed PLA
• Attachment: integrated rectangular neodymium magnets
• Structure: one inner half and one outer counterpart
• Colors: pastel green and lavender

Usage

• Choose a suitable spot on a transparent glass or acrylic glass wall.
• Make sure there is enough space inside and outside for the planet halves.
• Hold the inner half against the terrarium wall and carefully guide the outer counterpart toward it.
• Align both halves so that the planet shape and the ring match up visually.
• Check that the inner ring surface is aligned as an easily accessible platform.
• Check for a secure hold before placing your animal inside.
• Keep the terrarium opening and ventilation surfaces clear.

Care and cleaning

• Hold both halves firmly when removing so that no part falls down.
• Clean the parts carefully with lukewarm water and a soft microfiber cloth.
• Do not use abrasive sponges, hard brushes, or sharp-edged tools.
• Do not use acetone, solvents, alcohol-based cleaners, or aggressive chemicals.
• Do not use hot or boiling water.
• Do not clean the platform in the dishwasher.
• Let both halves dry after cleaning and check the secure hold again after reattaching.

Important notes

Placement and wall thickness

The platform requires a suitable attachment point without an obstructive back wall or other furnishings between the planet halves and the pane. Also consider the space required by the outer half next to the terrarium.

Heat and sunlight

Product safety

This product is intended as a terrarium platform for suitable small invertebrates, such as jumping spiders. It is not a toy.

• Keep away from small children.
• Contains magnets. Swallowed magnets can cause serious internal injuries. Seek immediate medical attention if swallowed or inhaled.
• Bring the magnetic halves together carefully and do not let them snap together uncontrollably.
• Regularly check both halves for cracks, damaged ring areas, and loose magnets.
• Do not continue to use the product if components or magnets are loose or damaged.
• Support the inner half when removing the outer counterpart.
• Check the attachment before use and after every repositioning.

Manufacturing information

Due to the 3D printing process, fine layer lines, seams, or minor surface deviations may be visible. These are typical characteristics of the production.

The actual color may vary slightly from the product images due to screen display, lighting, and different material batches.