Fly agaric for jumping spider terrariums as decoration & climbing element

A small fly agaric mushroom for your fairytale terrarium forest world.

The SpoodScapes decorative mushroom adds a colorful accent to your jumping spider terrarium with its red cap, raised white spots, and light-colored stem. Among tree trunks, hides, and other forest motifs, it complements your setup with a playful detail.

The mushroom serves as decoration and an additional surface for climbing and resting. With its wide base, it is placed directly on a suitable surface within the terrarium.

The most important things at a glance

• Decorative fly agaric for jumping spider terrariums
• Red mushroom cap with raised white spots
• Light-colored stem with a wide, flat base
• Additional surface for climbing and resting
• For placement on the terrarium floor
• Matches forest and fairytale-themed worlds
• 3D-printed from PLA
• Dimensions: 45 × 45 × 48 mm (W × D × H)

Scope of delivery

• 1 decorative mushroom in red-and-white fly agaric look

Terrarium, background, hides, water stations, bridges, leaves, animals, and other pictured decoration are not included in the scope of delivery.

The fly agaric in detail

Fairytale forest look

The red cap with its white spots captures the typical appearance of a fly agaric. The sculpted dots and the light-colored stem make it an eye-catcher among the other furnishing elements.

The decorative mushroom is made entirely of 3D-printed PLA.

Additional climbing surface

The stem and mushroom cap add another structure for exploration to your setup. The top can serve as an elevated resting place or a stopover for your jumping spider.

Combine the mushroom with matching climbing elements and choose the spacing according to the size and agility of your animal.

For placement

The wide, flat base forms the support surface of the mushroom. Place it on the base plate or another stable surface. On loose substrate or moss, particular attention must be paid to ensure a secure, non-tipping stance.

A magnetic attachment is not provided for this model.

Dimensions and materials

• Width: 45 mm
• Depth: 45 mm
• Height: 48 mm
• Material: 3D-printed PLA
• Color: red cap with white spots and light-colored stem

Use

• Choose a suitable spot on the terrarium floor.
• Place the mushroom so that the base rests securely and cannot tip over.
• Keep the terrarium opening and existing ventilation areas clear.
• Ensure there is sufficient space between the mushroom and adjacent furnishing elements.
• Check for a secure stance after every change to the setup.

Care and cleaning

• Clean the mushroom carefully with lukewarm water and a soft microfiber cloth.
• Do not use scouring pads, hard brushes, or sharp-edged tools.
• Do not use acetone, solvents, alcohol-based cleaners, or aggressive chemicals.
• Do not use hot or boiling water.
• Do not clean the mushroom in the dishwasher.
• Allow it to dry after cleaning before putting it back in.

Important notes

Suitable placement

The mushroom is intended as decoration and a climbing element for suitable small invertebrates. Place it so that it cannot tip over or fall onto your animal.

Heat and sunlight

PLA is heat-sensitive and can deform when subjected to high heat. Keep the mushroom away from direct sunlight, heat lamps, radiators, hot surfaces, and open flames.

Product safety

This product is intended as a terrarium accessory. It is not a toy and is not suitable for consumption.

• Keep away from small children.
• Check the mushroom regularly for cracks, damage, and loose parts.
• Do not continue to use the product if it is damaged or has sharp, broken edges.
• Check for a secure stance before putting your animal inside.
• Avoid strong pressure on the mushroom cap and the stem.

Notes on manufacturing

Due to the 3D printing process, fine layer lines, seams, or minor surface deviations may be visible. These are typical features of the manufacturing process.

The actual color may vary slightly from the product images due to screen display, lighting, and different material batches.