House-shaped jumping spider enclosure

Your own little world for your jumping spider: The SpoodScapes house-shaped jumping spider terrarium combines clear acrylic panels with a 3D-printed PLA frame. The removable magnetic front makes it easy to access the interior for decoration and daily care.

You will receive the terrarium without decoration, allowing you to customize it to suit your pet and your chosen theme.

Key features at a glance

• House-shaped terrarium for individual customization
• Clear acrylic panels for an unobstructed view into the terrarium
• Removable front with five integrated magnets
• Integrated handle for easy opening
• Ventilation holes with a diameter of 1.4 mm
• Dimensions: 13.6 × 13.6 × 27.6 cm (W × D × H)
• Available in nine colors

Scope of delivery

• 1 SpoodScapes house-shaped terrarium in the chosen color, including a removable acrylic front with magnetic closure and integrated handle

The terrarium is delivered without decoration.

Terrarium features

Magnetic front with handle

Five integrated magnets keep the front closed. The front can be removed via the handle for decorating, cleaning, and feeding. Check after every opening that it is seated completely and securely.

Clear acrylic panels

Ventilation holes with 1.4 mm diameter

The holes allow for air exchange within the terrarium. Before placing your pet inside, ensure that it is large enough and cannot escape through the openings.

3D-printed frame

The frame is made of PLA and produced using 3D printing technology. The material is heat-sensitive and must be protected from direct sunlight and excessive heat.

Dimensions and materials

• Width: 136 mm
• Depth: 136 mm
• Height: 276 mm
• Weight: approx. 500 g
• Ventilation hole diameter: 1.4 mm
• Frame: 3D-printed PLA
• Panels: transparent acrylic
• Closure: five integrated magnets

The weight may vary slightly due to the manufacturing process.

Care and cleaning

• Clean with a clean, soft microfiber cloth and lukewarm water.
• Use mild soap if necessary and remove all residue thoroughly.
• Dry carefully with a soft, clean cloth afterwards.
• Do not use rough cloths, paper towels, scouring pads, or hard brushes.
• Do not use alcohol-based cleaners, acetone, solvents, or aggressive cleaning agents.
• Do not use hot or boiling water.
• Do not scratch the panels with sharp objects or apply strong pressure.
• Do not dry in direct sunlight.

Unsuitable cleaning agents and abrasive tools can scratch, cloud, or damage the acrylic and may also affect the PLA components.

Important husbandry notes

The terrarium is intended for jumping spiders of sufficient size and other suitable invertebrates. Before purchasing, verify that the size, ventilation, and construction are appropriate for the specific species and your individual pet.

Pet size and risk of escape

The ventilation holes have a diameter of 1.4 mm. Very small spiderlings or other invertebrates can escape through these openings. Check that your pet is large enough before placing it inside. The terrarium is not suitable for every stage of development.

Interior and husbandry conditions

Ensure proper interior setup and maintain the temperature, humidity, and ventilation required for your pet. The empty terrarium must be appropriately equipped before introducing the animal.

Location and heat

Place the terrarium on a stable indoor surface. Direct sunlight can quickly heat up the interior and endanger your pet. Keep it away from sunny windows, radiators, heaters, hot surfaces, and other heat sources.

Product safety

• Not a toy. Keep out of reach of small children. Handling by children only under adult supervision.
• Contains small magnets. Swallowed magnets can cause severe internal injuries. Seek medical attention immediately if swallowed or inhaled.
• Regularly check for cracks, damage, loose parts, and loose magnets. Discontinue use if damaged.
• Always ensure the front is seated fully and securely before leaving your pet unattended.
• Place on a flat, stable surface and protect from falling.
• Protect from direct sunlight, open flames, and excessive heat. PLA can become soft and warp when heated.
• Handle acrylic panels with care, as they can scratch or crack if handled improperly.
• Not intended for contact with food.
• Not suitable for pets that can damage the enclosure or require husbandry conditions for which the terrarium is not designed.

Manufacturing notes

3D-printed surfaces

Due to the 3D printing process, fine layer lines, small seams, and slight surface variations may be visible. These are part of the manufacturing process and do not affect the intended function.

Color variations

Actual colors may differ from product images due to screen settings, lighting, and photography. Slight color variations are also possible between individual components and production batches.

Not included in the scope of delivery

Animals, substrate, plants, decoration, food, and additional accessories are not included.