{"title":"Platforms \u0026 Resting Spots for Jumping Spiders","description":"\u003cp\u003eCreate additional areas for climbing, jumping, and resting in your jumping spider enclosure. Discover, for example, wall platforms, jumping platforms, and elevated resting spots in various designs and themes. You can find information on dimensions and mounting for each product.\u003cbr\u003e\u003c\/p\u003e","products":[{"product_id":"magnetische-plattform-springspinnen-baumscheibe","title":"Magnetic platform for jumping spiders – tree slice design","description":"\u003cp\u003eA small vantage point for your terrarium forest world.\u003c\/p\u003e\n\n\u003cp\u003eThe magnetic SpoodScapes platform in a tree slice design creates a raised space for resting, climbing, and jumping. The light surface with visible growth rings and the brown edge with bark texture capture the look of a small tree slice.\u003c\/p\u003e\n\n\u003cp\u003eWith the integrated neodymium magnet and the included counter-magnet, the platform can be attached to suitable glass or acrylic glass walls. Place it next to a hide, at the end of a suspension bridge, or as an additional stopover in your enclosure.\u003c\/p\u003e\n\n\u003ch3\u003eKey features at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eMagnetic platform for jumping spider terrariums\u003c\/li\u003e\n\n\u003cli\u003eRaised resting place and additional jumping and landing surface\u003c\/li\u003e\n\n\u003cli\u003eTree slice design with growth rings and textured bark look\u003c\/li\u003e\n\n\u003cli\u003eTwo-tone design in light wood and brown shades\u003c\/li\u003e\n\n\u003cli\u003eMagnetic attachment to suitable glass and acrylic glass walls\u003c\/li\u003e\n\n\u003cli\u003eExternal counter-magnet included in delivery\u003c\/li\u003e\n\n\u003cli\u003e3D-printed from PLA\u003c\/li\u003e\n\n\u003cli\u003eDimensions: 45 × 20 × 13 mm (W × D × H)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e1 tree slice design platform with integrated neodymium magnet\u003c\/li\u003e\n\n\u003cli\u003e1 external counter-magnet\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eTerrarium, background, hides, water stations, bridges, leaves, animals, and other pictured decorations are not included.\u003c\/p\u003e\n\n\u003ch3\u003eThe platform in detail\u003c\/h3\u003e\n\n\u003ch4\u003eRaised resting and vantage point\u003c\/h4\u003e\n\u003cp\u003eThe flat top provides your jumping spider with an additional surface for resting and observing. By attaching it to the terrarium wall, you can also create more usable space above the floor.\u003c\/p\u003e\n\n\u003ch4\u003eAdditional jumping surface\u003c\/h4\u003e\n\u003cp\u003eThe platform can be used individually or in combination with other enclosure elements. As a stopover next to a suspension bridge, a hide, or a feeding station, it complements the pathways through your terrarium.\u003c\/p\u003e\n\u003cp\u003eChoose distances and positions suitable for your pet's size and agility.\u003c\/p\u003e\n\n\u003ch4\u003eMagnetic attachment\u003c\/h4\u003e\n\u003cp\u003eThe integrated neodymium magnet holds the platform against a suitable glass or acrylic glass wall together with the external counter-magnet. Glue, tape, or suction cups are not required for this.\u003c\/p\u003e\n\u003cp\u003eThe hold depends on the thickness and nature of the terrarium wall. Before use, check that the platform is attached securely and horizontally.\u003c\/p\u003e\n\n\u003ch4\u003eDetailed tree slice look\u003c\/h4\u003e\n\u003cp\u003eGrowth rings on the light top surface and the brown bark structure on the outer edge give the platform its forest character. It fits well with forest-themed environments and other naturalistic terrariums.\u003c\/p\u003e\n\u003cp\u003eThe platform is made of 3D-printed PLA with a wood look.\u003c\/p\u003e\n\n\u003ch3\u003eDimensions and materials\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eWidth: 45 mm\u003c\/li\u003e\n\n\u003cli\u003eDepth: 20 mm\u003c\/li\u003e\n\n\u003cli\u003eHeight: 13 mm\u003c\/li\u003e\n\n\u003cli\u003ePlatform: 3D-printed PLA\u003c\/li\u003e\n\n\u003cli\u003eAttachment: integrated neodymium magnet and external counter-magnet\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThe dimensions describe the outer measurements of the product.\u003c\/p\u003e\n\n\u003ch3\u003eUsage\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eChoose a suitable spot on a glass or acrylic glass wall.\u003c\/li\u003e\n\n\u003cli\u003ePlace the platform on the inside and the counter-magnet on the outside of the terrarium wall.\u003c\/li\u003e\n\n\u003cli\u003eGently bring both parts together.\u003c\/li\u003e\n\n\u003cli\u003eAlign the platform horizontally with the surface facing up.\u003c\/li\u003e\n\n\u003cli\u003eCheck for a secure hold before introducing your animal.\u003c\/li\u003e\n\n\u003cli\u003eKeep the terrarium opening and existing ventilation areas clear.\u003c\/li\u003e\n\n\u003cli\u003eRe-check the attachment every time you reposition it.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eCare and cleaning\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eClean the platform carefully with lukewarm water and a soft microfiber cloth.\u003c\/li\u003e\n\n\u003cli\u003eDo not use scouring pads, hard brushes, or sharp-edged tools.\u003c\/li\u003e\n\n\u003cli\u003eDo not use acetone, solvents, alcohol-based cleaners, or aggressive chemicals.\u003c\/li\u003e\n\n\u003cli\u003eDo not use hot or boiling water.\u003c\/li\u003e\n\n\u003cli\u003eDo not clean the platform in the dishwasher.\u003c\/li\u003e\n\n\u003cli\u003eAllow to dry after cleaning before putting it back into use.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eImportant notes\u003c\/h3\u003e\n\n\u003ch4\u003eSuitable placement\u003c\/h4\u003e\n\u003cp\u003eThe platform is intended as a resting and climbing surface for suitable small invertebrates. Check whether its size and chosen position are suitable for your animal. A maximum load capacity is not specified.\u003c\/p\u003e\n\n\u003ch4\u003eHeat and sunlight\u003c\/h4\u003e\n\u003cp\u003ePLA is heat-sensitive and can deform when strongly heated. Keep the platform away from direct sunlight, heat lamps, radiators, hot surfaces, and open flames. It is not intended as a heated basking spot.\u003c\/p\u003e\n\n\u003ch3\u003eProduct safety\u003c\/h3\u003e\n\u003cp\u003eThis product is intended as a terrarium accessory for suitable small invertebrates, such as jumping spiders. It is not a toy.\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eKeep away from small children.\u003c\/li\u003e\n\n\u003cli\u003eContains small magnets and small parts that could be swallowed.\u003c\/li\u003e\n\n\u003cli\u003eSwallowed magnets can cause severe internal injuries. Seek medical help immediately if swallowed or inhaled.\u003c\/li\u003e\n\n\u003cli\u003eKeep the loose counter-magnet out of the reach of children.\u003c\/li\u003e\n\n\u003cli\u003eCheck the platform regularly for cracks, damage, and loose magnets.\u003c\/li\u003e\n\n\u003cli\u003eDo not continue to use the product if components or magnets are loose or damaged.\u003c\/li\u003e\n\n\u003cli\u003eRegularly check that the platform is holding securely to the terrarium wall.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eManufacturing notes\u003c\/h3\u003e\n\u003cp\u003eDue to the 3D printing process, fine layer lines, seams, or slight surface variations may be visible. These are typical characteristics of the manufacturing process.\u003c\/p\u003e\n\u003cp\u003eThe actual color may vary slightly from the product images due to screen display, lighting, and different material batches.\u003c\/p\u003e","brand":"SpoodScapes","offers":[{"title":"Default Title","offer_id":58511621751167,"sku":null,"price":6.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/6997\/3887\/files\/NUL4715.png?v=1790251346"},{"product_id":"baumstamm-versteck-springspinnen","title":"Tree Trunk Hideout for Jumping Spiders – Climbing Tree with Cave","description":"\u003cp\u003eAn enchanted little tree for your terrarium forest world.\u003c\/p\u003e\n\n\u003cp\u003eThe SpoodScapes tree trunk hide combines a branched climbing structure with a cave inside. Twisted roots, distinct bark textures, and small branch extensions give the tree the look of an old, weathered forest trunk.\u003c\/p\u003e\n\n\u003cp\u003eYour jumping spider can reach the hollow interior through the front knot-hole opening. Outside, the trunk and branches offer additional surfaces for climbing and exploring. In this way, the tree adds both a retreat and various elevated spots to your enclosure setup.\u003c\/p\u003e\n\n\u003ch3\u003eKey features at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eTree trunk hide with a hollow interior\u003c\/li\u003e\n\n\u003cli\u003eFront entrance opening in a natural knot-hole shape\u003c\/li\u003e\n\n\u003cli\u003eClimbing structure with roots, bark relief, and branch extensions\u003c\/li\u003e\n\n\u003cli\u003eWide root base for placement in the terrarium\u003c\/li\u003e\n\n\u003cli\u003eBrown wood look suitable for forest-themed habitats\u003c\/li\u003e\n\n\u003cli\u003e3D-printed from PLA\u003c\/li\u003e\n\n\u003cli\u003eDimensions: 65 × 60 × 100 mm (W × D × H)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e1 tree trunk hide with hollow interior\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eTerrarium, other hides, feeding dishes, animals, substrate, and additional depicted decorations are not included.\u003c\/p\u003e\n\n\u003ch3\u003eThe tree trunk hide in detail\u003c\/h3\u003e\n\n\u003ch4\u003eCave interior\u003c\/h4\u003e\n\u003cp\u003eThe knot-hole opening leads into a sheltered interior that your jumping spider can use as a retreat and for spinning its web. Whether and how your animal uses the hide depends on its individual preferences.\u003c\/p\u003e\n\n\u003ch4\u003eClimbing on multiple levels\u003c\/h4\u003e\n\u003cp\u003eThe textured surface, twisted roots, and branch extensions create various paths along the trunk. The tree can be combined with other climbing elements, platforms, or a suspension bridge.\u003c\/p\u003e\n\n\u003ch4\u003eDetailed forest look\u003c\/h4\u003e\n\u003cp\u003eThe brown coloring and the distinct wood and bark structure are reminiscent of an old tree trunk. This makes the hide a perfect fit for forest-themed habitats and other naturalistic terrarium setups.\u003c\/p\u003e\n\u003cp\u003eThe tree is made of 3D-printed PLA with a wood finish.\u003c\/p\u003e\n\n\u003ch4\u003eFor placement\u003c\/h4\u003e\n\u003cp\u003eThe sprawling root base forms the tree's stable footing. Place it on a solid surface and check that it stands securely. On loose substrate, you must pay special attention to ensuring it is stable and tip-proof.\u003c\/p\u003e\n\n\u003ch3\u003eDimensions and materials\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eWidth: 65 mm\u003c\/li\u003e\n\n\u003cli\u003eDepth: 60 mm\u003c\/li\u003e\n\n\u003cli\u003eHeight: 100 mm\u003c\/li\u003e\n\n\u003cli\u003eMaterial: 3D-printed PLA\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThe dimensions describe the outer measurements. Check before use whether the entrance opening and the interior offer sufficient space for your animal.\u003c\/p\u003e\n\n\u003ch3\u003eUsage\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eChoose a suitable spot on the terrarium floor.\u003c\/li\u003e\n\n\u003cli\u003ePlace the tree so that the root base rests securely and cannot tip over.\u003c\/li\u003e\n\n\u003cli\u003eKeep the entrance opening clear and easily accessible.\u003c\/li\u003e\n\n\u003cli\u003eAllow sufficient space from the terrarium opening and any moving parts.\u003c\/li\u003e\n\n\u003cli\u003ePosition supplementary climbing elements to suit the size and agility of your animal.\u003c\/li\u003e\n\n\u003cli\u003eCheck the stability after every change to the setup.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eCare and cleaning\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCarefully clean the empty hide with lukewarm water and a soft microfiber cloth.\u003c\/li\u003e\n\n\u003cli\u003eRemove visible dirt from the accessible areas of the interior as well.\u003c\/li\u003e\n\n\u003cli\u003eDo not use scouring pads, hard brushes, or sharp-edged tools.\u003c\/li\u003e\n\n\u003cli\u003eDo not use acetone, solvents, alcohol-based cleaners, or aggressive chemicals.\u003c\/li\u003e\n\n\u003cli\u003eDo not use hot or boiling water.\u003c\/li\u003e\n\n\u003cli\u003eDo not clean the hide in the dishwasher.\u003c\/li\u003e\n\n\u003cli\u003eAllow it to dry completely after cleaning before putting it back.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eImportant notes\u003c\/h3\u003e\n\n\u003ch4\u003eAppropriate size and stability\u003c\/h4\u003e\n\u003cp\u003eChoose a hide that is appropriate for the size of your animal. External dimensions alone do not indicate how much space is available inside. Set up the tree so that it can neither tip over nor fall on your animal.\u003c\/p\u003e\n\n\u003ch4\u003eHeat and sunlight\u003c\/h4\u003e\n\u003cp\u003ePLA is heat-sensitive and can deform if it gets too hot. Keep the hide away from direct sunlight, heat lamps, radiators, hot surfaces, and open flames.\u003c\/p\u003e\n\n\u003ch3\u003eProduct safety\u003c\/h3\u003e\n\u003cp\u003eThis product is intended as a hide and climbing accessory for suitable small invertebrates, such as jumping spiders. It is not a toy.\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eKeep away from small children.\u003c\/li\u003e\n\n\u003cli\u003eRegularly check the tree for cracks, damaged branch extensions, and loose parts.\u003c\/li\u003e\n\n\u003cli\u003eDiscontinue use if the product is damaged or has sharp, broken edges.\u003c\/li\u003e\n\n\u003cli\u003eCheck that the tree stands securely before introducing your animal.\u003c\/li\u003e\n\n\u003cli\u003eAvoid applying pressure to the branch extensions and other delicate areas.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eManufacturing notes\u003c\/h3\u003e\n\u003cp\u003eDue to the 3D printing process, fine layer lines, seams, or slight surface variations may be visible. These are typical characteristics of the manufacturing process.\u003c\/p\u003e\n\u003cp\u003eThe actual color may differ slightly from the product images due to screen settings, lighting, and different material batches.\u003c\/p\u003e","brand":"SpoodScapes","offers":[{"title":"Default Title","offer_id":58511665791359,"sku":null,"price":7.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/6997\/3887\/files\/NUL4622a.png?v=1790251676"},{"product_id":"fliegenpilz-springspinnen-terrarium","title":"Fly agaric for jumping spider terrariums as decoration \u0026 climbing element","description":"\u003cp\u003eA small fly agaric mushroom for your fairytale terrarium forest world.\u003c\/p\u003e\n\n\u003cp\u003eThe SpoodScapes decorative mushroom adds a colorful accent to your jumping spider terrarium with its red cap, raised white spots, and light-colored stem. Among tree trunks, hides, and other forest motifs, it complements your setup with a playful detail.\u003c\/p\u003e\n\n\u003cp\u003eThe mushroom serves as decoration and an additional surface for climbing and resting. With its wide base, it is placed directly on a suitable surface within the terrarium.\u003c\/p\u003e\n\n\u003ch3\u003eThe most important things at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eDecorative fly agaric for jumping spider terrariums\u003c\/li\u003e\n\n\u003cli\u003eRed mushroom cap with raised white spots\u003c\/li\u003e\n\n\u003cli\u003eLight-colored stem with a wide, flat base\u003c\/li\u003e\n\n\u003cli\u003eAdditional surface for climbing and resting\u003c\/li\u003e\n\n\u003cli\u003eFor placement on the terrarium floor\u003c\/li\u003e\n\n\u003cli\u003eMatches forest and fairytale-themed worlds\u003c\/li\u003e\n\n\u003cli\u003e3D-printed from PLA\u003c\/li\u003e\n\n\u003cli\u003eDimensions: 45 × 45 × 48 mm (W × D × H)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e1 decorative mushroom in red-and-white fly agaric look\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eTerrarium, background, hides, water stations, bridges, leaves, animals, and other pictured decoration are not included in the scope of delivery.\u003c\/p\u003e\n\n\u003ch3\u003eThe fly agaric in detail\u003c\/h3\u003e\n\n\u003ch4\u003eFairytale forest look\u003c\/h4\u003e\n\u003cp\u003eThe red cap with its white spots captures the typical appearance of a fly agaric. The sculpted dots and the light-colored stem make it an eye-catcher among the other furnishing elements.\u003c\/p\u003e\n\u003cp\u003eThe decorative mushroom is made entirely of 3D-printed PLA.\u003c\/p\u003e\n\n\u003ch4\u003eAdditional climbing surface\u003c\/h4\u003e\n\u003cp\u003eThe stem and mushroom cap add another structure for exploration to your setup. The top can serve as an elevated resting place or a stopover for your jumping spider.\u003c\/p\u003e\n\u003cp\u003eCombine the mushroom with matching climbing elements and choose the spacing according to the size and agility of your animal.\u003c\/p\u003e\n\n\u003ch4\u003eFor placement\u003c\/h4\u003e\n\u003cp\u003eThe wide, flat base forms the support surface of the mushroom. Place it on the base plate or another stable surface. On loose substrate or moss, particular attention must be paid to ensure a secure, non-tipping stance.\u003c\/p\u003e\n\u003cp\u003eA magnetic attachment is not provided for this model.\u003c\/p\u003e\n\n\u003ch3\u003eDimensions and materials\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eWidth: 45 mm\u003c\/li\u003e\n\n\u003cli\u003eDepth: 45 mm\u003c\/li\u003e\n\n\u003cli\u003eHeight: 48 mm\u003c\/li\u003e\n\n\u003cli\u003eMaterial: 3D-printed PLA\u003c\/li\u003e\n\n\u003cli\u003eColor: red cap with white spots and light-colored stem\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eUse\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eChoose a suitable spot on the terrarium floor.\u003c\/li\u003e\n\n\u003cli\u003ePlace the mushroom so that the base rests securely and cannot tip over.\u003c\/li\u003e\n\n\u003cli\u003eKeep the terrarium opening and existing ventilation areas clear.\u003c\/li\u003e\n\n\u003cli\u003eEnsure there is sufficient space between the mushroom and adjacent furnishing elements.\u003c\/li\u003e\n\n\u003cli\u003eCheck for a secure stance after every change to the setup.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eCare and cleaning\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eClean the mushroom carefully with lukewarm water and a soft microfiber cloth.\u003c\/li\u003e\n\n\u003cli\u003eDo not use scouring pads, hard brushes, or sharp-edged tools.\u003c\/li\u003e\n\n\u003cli\u003eDo not use acetone, solvents, alcohol-based cleaners, or aggressive chemicals.\u003c\/li\u003e\n\n\u003cli\u003eDo not use hot or boiling water.\u003c\/li\u003e\n\n\u003cli\u003eDo not clean the mushroom in the dishwasher.\u003c\/li\u003e\n\n\u003cli\u003eAllow it to dry after cleaning before putting it back in.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eImportant notes\u003c\/h3\u003e\n\n\u003ch4\u003eSuitable placement\u003c\/h4\u003e\n\u003cp\u003eThe mushroom is intended as decoration and a climbing element for suitable small invertebrates. Place it so that it cannot tip over or fall onto your animal.\u003c\/p\u003e\n\n\u003ch4\u003eHeat and sunlight\u003c\/h4\u003e\n\u003cp\u003ePLA is heat-sensitive and can deform when subjected to high heat. Keep the mushroom away from direct sunlight, heat lamps, radiators, hot surfaces, and open flames.\u003c\/p\u003e\n\n\u003ch3\u003eProduct safety\u003c\/h3\u003e\n\u003cp\u003eThis product is intended as a terrarium accessory. It is not a toy and is not suitable for consumption.\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eKeep away from small children.\u003c\/li\u003e\n\n\u003cli\u003eCheck the mushroom regularly for cracks, damage, and loose parts.\u003c\/li\u003e\n\n\u003cli\u003eDo not continue to use the product if it is damaged or has sharp, broken edges.\u003c\/li\u003e\n\n\u003cli\u003eCheck for a secure stance before putting your animal inside.\u003c\/li\u003e\n\n\u003cli\u003eAvoid strong pressure on the mushroom cap and the stem.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eNotes on manufacturing\u003c\/h3\u003e\n\u003cp\u003eDue to the 3D printing process, fine layer lines, seams, or minor surface deviations may be visible. These are typical features of the manufacturing process.\u003c\/p\u003e\n\u003cp\u003eThe actual color may vary slightly from the product images due to screen display, lighting, and different material batches.\u003c\/p\u003e","brand":"SpoodScapes","offers":[{"title":"Default Title","offer_id":58511733064063,"sku":null,"price":5.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/6997\/3887\/files\/NUL4621.png?v=1790251972"},{"product_id":"magnetische-saturn-plattform-springspinnen","title":"Magnetic Saturn platform for jumping spiders as a two-part planet","description":"\u003cp\u003eA small planet as a landing pad in your terrarium galaxy.\u003c\/p\u003e\n\n\u003cp\u003eThe magnetic SpoodScapes Saturn platform combines a pastel green planet with a lavender ring. Its special design consists of two halves: one sits inside the terrarium, the other outside on the transparent wall. Together, they create the impression that Saturn is floating through the terrarium wall.\u003c\/p\u003e\n\n\u003cp\u003eThe inner part of the planetary ring offers your jumping spider an additional surface for climbing, resting, and jumping. The outer half serves as a magnetic counterpart and completes the planet shape.\u003c\/p\u003e\n\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eMagnetic platform in a Saturn design for jumping spiders\u003c\/li\u003e\n\n\u003cli\u003eTwo-part planet with an inner and an outer half\u003c\/li\u003e\n\n\u003cli\u003eFloating planet effect on transparent terrarium walls\u003c\/li\u003e\n\n\u003cli\u003eInner planetary ring as a resting and jumping area\u003c\/li\u003e\n\n\u003cli\u003eIntegrated neodymium magnets in both halves\u003c\/li\u003e\n\n\u003cli\u003eFor suitable glass and acrylic glass walls\u003c\/li\u003e\n\n\u003cli\u003ePastel green planet with lavender ring\u003c\/li\u003e\n\n\u003cli\u003e3D-printed from PLA\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e1 Saturn platform, consisting of an inner planet half and a matching outer counterpart\u003c\/li\u003e\n\n\u003cli\u003eIntegrated neodymium magnets in both halves\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThe two halves together form one planet. The outer half serves as a counterpart for attachment and is not an independently usable platform.\u003c\/p\u003e\n\u003cp\u003eTerrarium, back wall, hides, water stations, bridges, animals, and other pictured decorations are not included in the scope of delivery.\u003c\/p\u003e\n\n\u003ch3\u003eThe Saturn platform in detail\u003c\/h3\u003e\n\n\u003ch4\u003eA planet on both sides of the wall\u003c\/h4\u003e\n\u003cp\u003eThe two planet halves are attached opposite each other on the inside and outside of a transparent terrarium wall. The coordinated shape makes the planet appear to pass through the pane.\u003c\/p\u003e\n\u003cp\u003eFor this effect and for attachment, the chosen spot must be accessible from both sides.\u003c\/p\u003e\n\n\u003ch4\u003eElevated resting and jumping spot\u003c\/h4\u003e\n\u003cp\u003eThe wide ring section inside the terrarium creates an additional area for hanging out and exploring. You can place it next to a hide, a bridge, or other platforms.\u003c\/p\u003e\n\u003cp\u003eThe ring section located outside the terrarium belongs to the decorative counterpart and is not accessible to your animal in the closed terrarium.\u003c\/p\u003e\n\n\u003ch4\u003eMagnetic attachment\u003c\/h4\u003e\n\u003cp\u003eRectangular neodymium magnets are integrated into both halves. They hold the parts together through a suitable glass or acrylic glass wall. Glue, tape, or suction cups are not required.\u003c\/p\u003e\n\u003cp\u003eThe hold depends on the wall thickness and the nature of the terrarium wall. Check that both halves are securely seated before use.\u003c\/p\u003e\n\n\u003ch4\u003ePastel colors for your space-themed world\u003c\/h4\u003e\n\u003cp\u003eThe combination of pastel green and lavender matches the SpoodScapes Luna theme world. Together with moon hides, rockets, and other space motifs, it creates a small galaxy for your terrarium.\u003c\/p\u003e\n\n\u003ch3\u003eMaterials and structure\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003ePlanet halves and ring: 3D-printed PLA\u003c\/li\u003e\n\n\u003cli\u003eAttachment: integrated rectangular neodymium magnets\u003c\/li\u003e\n\n\u003cli\u003eStructure: one inner half and one outer counterpart\u003c\/li\u003e\n\n\u003cli\u003eColors: pastel green and lavender\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eUsage\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eChoose a suitable spot on a transparent glass or acrylic glass wall.\u003c\/li\u003e\n\n\u003cli\u003eMake sure there is enough space inside and outside for the planet halves.\u003c\/li\u003e\n\n\u003cli\u003eHold the inner half against the terrarium wall and carefully guide the outer counterpart toward it.\u003c\/li\u003e\n\n\u003cli\u003eAlign both halves so that the planet shape and the ring match up visually.\u003c\/li\u003e\n\n\u003cli\u003eCheck that the inner ring surface is aligned as an easily accessible platform.\u003c\/li\u003e\n\n\u003cli\u003eCheck for a secure hold before placing your animal inside.\u003c\/li\u003e\n\n\u003cli\u003eKeep the terrarium opening and ventilation surfaces clear.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eCare and cleaning\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eHold both halves firmly when removing so that no part falls down.\u003c\/li\u003e\n\n\u003cli\u003eClean the parts carefully with lukewarm water and a soft microfiber cloth.\u003c\/li\u003e\n\n\u003cli\u003eDo not use abrasive sponges, hard brushes, or sharp-edged tools.\u003c\/li\u003e\n\n\u003cli\u003eDo not use acetone, solvents, alcohol-based cleaners, or aggressive chemicals.\u003c\/li\u003e\n\n\u003cli\u003eDo not use hot or boiling water.\u003c\/li\u003e\n\n\u003cli\u003eDo not clean the platform in the dishwasher.\u003c\/li\u003e\n\n\u003cli\u003eLet both halves dry after cleaning and check the secure hold again after reattaching.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eImportant notes\u003c\/h3\u003e\n\n\u003ch4\u003ePlacement and wall thickness\u003c\/h4\u003e\n\u003cp\u003eThe platform requires a suitable attachment point without an obstructive back wall or other furnishings between the planet halves and the pane. Also consider the space required by the outer half next to the terrarium.\u003c\/p\u003e\n\n\u003ch4\u003eHeat and sunlight\u003c\/h4\u003e\nPLA is heat-sensitive and can deform if exposed to high heat. Keep the platform away from direct sunlight, heat lamps, heaters, hot surfaces, and open flames.\n\n\u003ch3\u003eProduct safety\u003c\/h3\u003e\n\u003cp\u003eThis product is intended as a terrarium platform for suitable small invertebrates, such as jumping spiders. It is not a toy.\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eKeep away from small children.\u003c\/li\u003e\n\n\u003cli\u003eContains magnets. Swallowed magnets can cause serious internal injuries. Seek immediate medical attention if swallowed or inhaled.\u003c\/li\u003e\n\n\u003cli\u003eBring the magnetic halves together carefully and do not let them snap together uncontrollably.\u003c\/li\u003e\n\n\u003cli\u003eRegularly check both halves for cracks, damaged ring areas, and loose magnets.\u003c\/li\u003e\n\n\u003cli\u003eDo not continue to use the product if components or magnets are loose or damaged.\u003c\/li\u003e\n\n\u003cli\u003eSupport the inner half when removing the outer counterpart.\u003c\/li\u003e\n\n\u003cli\u003eCheck the attachment before use and after every repositioning.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eManufacturing information\u003c\/h3\u003e\n\u003cp\u003eDue to the 3D printing process, fine layer lines, seams, or minor surface deviations may be visible. These are typical characteristics of the production.\u003c\/p\u003e\n\u003cp\u003eThe actual color may vary slightly from the product images due to screen display, lighting, and different material batches.\u003c\/p\u003e","brand":"SpoodScapes","offers":[{"title":"Default Title","offer_id":58511870198143,"sku":null,"price":10.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/6997\/3887\/files\/1.png?v=1790253698"},{"product_id":"raketen-versteck-springspinnen","title":"Rocket hideout for jumping spiders – terrarium cave in pastel","description":"\u003cp\u003eA small space capsule as a retreat for your jumping spider.\u003c\/p\u003e\n\u003cp\u003eThe SpoodScapes Rocket Hide adds playful retro space charm to your terrarium. The cream-colored rocket body, the lavender tip and fins, and accents in pink and mint green complement our Luna theme world.\u003c\/p\u003e\n\u003cp\u003eBehind the round porthole entrance is a hollow interior that your jumping spider can use as a retreat and a place for its web. The rocket is designed to be free-standing and rests on its four fins.\u003c\/p\u003e\n\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eFree-standing rocket hide for jumping spiders\u003c\/li\u003e\n\n\u003cli\u003eHollow interior with a round porthole entrance\u003c\/li\u003e\n\n\u003cli\u003eFour fins act as support legs\u003c\/li\u003e\n\n\u003cli\u003eRetro rocket shape in cream, lavender, pink, and mint green\u003c\/li\u003e\n\n\u003cli\u003eMatches space, pastel, and Luna themes\u003c\/li\u003e\n\n\u003cli\u003eFor placement on a flat, stable surface\u003c\/li\u003e\n\n\u003cli\u003eNo magnetic attachment required\u003c\/li\u003e\n\n\u003cli\u003ePrecisely 3D-printed from PLA\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e1 free-standing rocket hide with a hollow interior\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eTerrarium, substrate, plants, animals, and additional decoration are not included.\u003c\/p\u003e\n\n\u003ch3\u003eThe rocket hide in detail\u003c\/h3\u003e\n\n\u003ch4\u003eCave with porthole entrance\u003c\/h4\u003e\n\u003cp\u003eThe round opening with a pink border leads into the hollow rocket body. The interior provides a sheltered place to retreat and spin a web.\u003c\/p\u003e\n\u003cp\u003eBefore use, check whether the entrance opening and the interior are appropriate for the size of your animal.\u003c\/p\u003e\n\n\u003ch4\u003eFour fins as support legs\u003c\/h4\u003e\n\u003cp\u003eThe four side rocket fins form the support base. Position the rocket so that all legs sit securely and it cannot tip over or sink.\u003c\/p\u003e\n\n\u003ch4\u003eRetro space design in pastel\u003c\/h4\u003e\n\u003cp\u003eThe classic rocket shape combines a cream-colored body with lavender fins and a matching tip. Mint green rings and the pink porthole provide soft color accents.\u003c\/p\u003e\n\n\u003ch4\u003eMatches the Luna theme world\u003c\/h4\u003e\n\u003cp\u003eCombine the rocket with the Moon Hide, the Saturn Platform, or the Asteroid Suspension Bridge. This creates a coordinated miniature space world for your jumping spider.\u003c\/p\u003e\n\n\u003ch3\u003eMaterials and construction\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eMaterial: 3D-printed PLA\u003c\/li\u003e\n\n\u003cli\u003eColors: Cream, lavender, pink, and mint green\u003c\/li\u003e\n\n\u003cli\u003eHollow rocket body with round access\u003c\/li\u003e\n\n\u003cli\u003eFree-standing construction with four fins as legs\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eUse\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eChoose a flat, stable surface in the terrarium.\u003c\/li\u003e\n\n\u003cli\u003eEnsure the rocket is stable and cannot tip over or sink.\u003c\/li\u003e\n\n\u003cli\u003eKeep the entrance clear and easily accessible for your animal.\u003c\/li\u003e\n\n\u003cli\u003eIf placed at an elevation, the entire base must be sufficiently supported and secured against falling.\u003c\/li\u003e\n\n\u003cli\u003eKeep ventilation openings and moving parts of the terrarium clear.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eCare and cleaning\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eClean the rocket gently with lukewarm water and a soft, non-abrasive microfiber cloth.\u003c\/li\u003e\n\n\u003cli\u003eDo not use rough cloths, scouring pads, or hard brushes.\u003c\/li\u003e\n\n\u003cli\u003eDo not use acetone, solvents, alcohol-based cleaners, or harsh chemicals.\u003c\/li\u003e\n\n\u003cli\u003eDo not use hot or boiling water.\u003c\/li\u003e\n\n\u003cli\u003eDo not clean the product in the dishwasher.\u003c\/li\u003e\n\n\u003cli\u003eAllow the rocket, including the interior, to dry completely after cleaning.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eImportant notes\u003c\/h3\u003e\n\n\u003ch4\u003eAppropriate size and placement\u003c\/h4\u003e\n\u003cp\u003eThe entrance opening and interior must match the size of your animal. Ensure your jumping spider can enter and leave the cave without difficulty.\u003c\/p\u003e\n\u003cp\u003eCheck the stability after cleaning or after making changes to the enclosure setup.\u003c\/p\u003e\n\n\u003ch4\u003eHeat and sunlight\u003c\/h4\u003e\n\u003cp\u003ePLA is heat-sensitive and can deform in excessive heat. Keep the rocket hide away from direct sunlight, heat lamps, radiators, hot surfaces, and open flames.\u003c\/p\u003e\n\n\u003ch3\u003eProduct safety\u003c\/h3\u003e\n\u003cp\u003eThis product is intended as terrarium decor for appropriately sized invertebrates, such as jumping spiders. It is not a toy.\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eKeep away from small children.\u003c\/li\u003e\n\n\u003cli\u003eCheck the rocket regularly for cracks, sharp edges, and damaged or loose parts.\u003c\/li\u003e\n\n\u003cli\u003eDo not use the product if it is damaged.\u003c\/li\u003e\n\n\u003cli\u003ePay special attention to undamaged support legs and a clear entrance.\u003c\/li\u003e\n\n\u003cli\u003ePlace the rocket so that it cannot tip over or fall.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eManufacturing notes\u003c\/h3\u003e\n\u003cp\u003eDue to the 3D printing process, fine layer lines, seams, or slight surface variations may be visible. These are a normal part of the manufacturing process.\u003c\/p\u003e\n\u003cp\u003eActual colors may vary slightly from the product images. Screen settings, lighting, and different material batches can influence color perception.\u003c\/p\u003e","brand":"Spoodscapes","offers":[{"title":"Default Title","offer_id":58512636150143,"sku":null,"price":14.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/6997\/3887\/files\/6a7dde58-853e-4497-a5df-7b2a6ce1e12b.png?v=1790259750"}],"url":"https:\/\/spoodscapes.com\/en\/collections\/kletterplattformen-springspinnen.oembed","provider":"Spoodscapes","version":"1.0","type":"link"}